Solid is one of the major states of matter States of matter are the distinct forms that different phases of matter take on. Historically, the distinction is made based on qualitative differences in bulk properties. Solid is the state in which matter maintains a fixed volume and shape; liquid is the state in which matter maintains a fixed volume but adapts to the shape of its container; and. It is characterized by structural rigidity and resistance to changes of shape or volume. Unlike a liquid Liquid is one of the three classical states of matter. Like a gas, a liquid is able to flow and take the shape of a container, but, like a solid, it resists compression. Unlike a gas, a liquid does not disperse to fill every space of a container, and maintains a fairly constant density. A distinctive property of the liquid state is surface tension,, a solid object does not flow to take on the shape of its container, nor does it expand to fill the entire volume available to it like a gas Gas is one of three classical states of matter. Near absolute zero, a substance exists as a solid. As heat is added to this substance it melts into a liquid at its melting point , boils into a gas at its boiling point, and if heated high enough would enter a plasma state in which the electrons are so energized that they leave their parent atoms does. The atoms in a solid are tightly bound to each other, either in a regular geometric lattice (crystalline solids A crystal or crystalline solid is a solid material, whose constituent atoms, molecules, or ions are arranged in an orderly repeating pattern extending in all three spatial dimensions. The scientific study of crystals and crystal formation is crystallography. The process of crystal formation via mechanisms of crystal growth is called, which include metals A metal is a chemical element that is a good conductor of both electricity and heat and forms cations and ionic bonds with non-metals. In chemistry, a metal is an element, compound, or alloy characterized by high electrical conductivity. In a metal, atoms readily lose electrons to form positive ions (cations). Those ions are surrounded by and ordinary water ice Ice, technically, is one of the 15 known crystalline phases of water. In non-scientific contexts, the term usually means ice Ih, which is known to be the most abundant of these solid phases. It can appear transparent or opaque bluish-white colour, depending on the presence of impurities or air inclusions. The addition of other materials such as) or irregularly (an amorphous solid An "amorphous solid" is a solid in which there is no long-range order of the positions of the atoms. . Most classes of solid materials can be found or prepared in an amorphous form. For instance, common window glass is an amorphous solid, many polymers (such as polystyrene) are amorphous, and even foods such as cotton candy are amorphous such as common window glass Glass is an amorphous solid material. Glasses are typically brittle, and often optically transparent. Glass is commonly used for windows, bottles, and eyewear; examples of glassy materials include soda-lime glass, borosilicate glass, acrylic glass, sugar glass, Muscovy-glass, and aluminium oxynitride. The term glass developed in the late Roman).

The branch of physics Physics is a natural science that involves the study of matter and its motion through space-time, as well as all applicable concepts, such as energy and force. More broadly, it is the general analysis of nature, conducted in order to understand how the universe behaves that deals with solids is called solid-state physics Solid-state physics, the largest branch of condensed matter physics, is the study of rigid matter, or solids, through methods such as quantum mechanics, crystallography, electromagnetism and metallurgy. Solid-state physics considers how the large-scale properties of solid materials result from their atomic-scale properties. Solid-state physics, and is the main branch of condensed matter physics Condensed matter physics is the field of physics that deals with the macroscopic and microscopic physical properties of matter. In particular, it is concerned with the "condensed" phases that appear whenever the number of constituents in a system is extremely large and the interactions between the constituents are strong. The most (which also includes liquids). Materials science Materials science is an interdisciplinary field involving the properties of matter and its applications to various areas of science and engineering. This science investigates the relationship between the structure of materials at atomic or molecular scales and their macroscopic properties. It includes elements of applied physics and chemistry is primarily concerned with the physical and chemical In chemistry, a chemical substance is a material with a specific chemical composition properties of solids. Solid-state chemistry Solid-state chemistry is the study of the synthesis, structure, and physical properties of solid materials. It therefore has a strong overlap with solid-state physics, mineralogy, crystallography, ceramics, metallurgy, thermodynamics, materials science and electronics with a focus on the synthesis of novel materials and their characterization is especially concerned with the synthesis In chemistry, chemical synthesis is purposeful execution of chemical reactions to get a product, or several products. This happens by physical and chemical manipulations usually involving one or more reactions. In modern laboratory usage, this tends to imply that the process is reproducible, reliable, and established to work in multiple of novel materials, as well as the science of identification and chemical composition In chemistry, the empirical formula of a chemical compound is the simplest whole number ratio of atoms of each element present in a compound. An empirical formula makes no reference to isomerism, structure, or absolute number of atoms. The empirical formula is used as standard for most ionic compounds, such as CaCl2, and for macromolecules, such.

Metamorphic banded gneiss

Contents 1 Microscopic description 2 Classes of solids 2.1 Metals 2.2 Minerals 2.3 Ceramics 2.4 Glass ceramics 2.5 Organic solids 2.5.1 Wood 2.5.2 Polymers 2.6 Composite materials 2.7 Semiconductors 2.8 Nanomaterials 2.9 Biomaterials 3 Physical properties 3.1 Mechanical 3.2 Thermal 3.3 Electrical 3.3.1 Electro-mechanical 3.4 Optical 3.4.1 Opto-electronic 4 See also 5 References

Microscopic description

Model of closely packed atoms within a crystalline solid. Schematic representation of a random-network glassy form (top) and ordered crystalline lattice (bottom) of identical chemical composition.

The atoms, molecules or ions which make up a solid may be arranged in an orderly repeating pattern, or irregularly. Materials whose constituents are arranged in a regular pattern are known as crystals A crystal or crystalline solid is a solid material, whose constituent atoms, molecules, or ions are arranged in an orderly repeating pattern extending in all three spatial dimensions. The scientific study of crystals and crystal formation is crystallography. The process of crystal formation via mechanisms of crystal growth is called. In some cases, the regular ordering can continue unbroken over a large scale, for example diamonds In mineralogy, diamond is an allotrope of carbon, where the carbon atoms are arranged in a variation of the face-centered cubic crystal structure called a diamond lattice. Diamond is less stable than graphite, but the conversion rate from diamond to graphite is negligible at ambient conditions. Diamond is renowned as a material with superlative, where each diamond is a single crystal A single crystal solid is a material in which the crystal lattice of the entire sample is continuous and unbroken to the edges of the sample, with no grain boundaries. Because grain boundaries can have significant effects on the physical and electrical properties of a material, single crystals are of interest to industry, and have important. Solid objects that are large enough to see and handle are rarely composed of a single crystal, but instead are made of a large number of single crystals, known as crystallites Crystallites are the small, often microscopic crystals that, held together through highly defective boundaries, constitute a polycrystalline solid. Metallurgists often refer to crystallites as "grains". It is accepted that a crystallite size is the coherent diffraction domain in the film and that the grains are larger than crystallites, whose size can vary from a few nanometers to several meters. Such materials are called polycrystalline Polycrystalline materials are solids that are composed of many crystallites of varying size and orientation. The variation in direction can be random or directed, possibly due to growth and processing conditions. Fiber texture is an example of the latter. Almost all common metals, and many ceramics A ceramic is an inorganic, non-metallic solid prepared by the action of heat and subsequent cooling. Ceramic materials may have a crystalline or partly crystalline structure, or may be amorphous . Because most common ceramics are crystalline, the definition of ceramic is often restricted to inorganic crystalline materials, as opposed to the non-, are polycrystalline.

In other materials, there is no long-range order in the position of the atoms. These solids are known as amorphous solids An "amorphous solid" is a solid in which there is no long-range order of the positions of the atoms. . Most classes of solid materials can be found or prepared in an amorphous form. For instance, common window glass is an amorphous solid, many polymers (such as polystyrene) are amorphous, and even foods such as cotton candy are amorphous; examples include polystyrene Polystyrene (IUPAC Poly(1-phenylethane-1,2-diyl)), abbreviated following ISO Standard PS, is an aromatic polymer made from the aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic and glass Glass is an amorphous solid material. Glasses are typically brittle, and often optically transparent. Glass is commonly used for windows, bottles, and eyewear; examples of glassy materials include soda-lime glass, borosilicate glass, acrylic glass, sugar glass, Muscovy-glass, and aluminium oxynitride. The term glass developed in the late Roman.

Whether a solid is crystalline or amorphous depends on the material involved, and the conditions in which it was formed. Solids which are formed by slow cooling will tend to be crystalline, while solids which are frozen rapidly are more likely to be amorphous. Likewise, the specific crystal structure In mineralogy and crystallography, crystal structure is a unique arrangement of atoms or molecules in a crystalline liquid or solid. A crystal structure is composed of a pattern, a set of atoms arranged in a particular way, and a lattice exhibiting long-range order and symmetry. Patterns are located upon the points of a lattice, which is an array adopted by a crystalline solid depends on the material involved and on how it was formed.

While many common objects, such as an ice cube or a coin, are chemically identical throughout, many other common materials comprise a number of different substances packed together. For example, a typical rock In geology, rock is a naturally occurring solid aggregate of minerals and/or mineraloids is an aggregate of several different minerals A mineral is a naturally occurring solid chemical substance that is formed through geological processes and that has a characteristic chemical composition, a highly ordered atomic structure, and specific physical properties. By comparison, a rock is an aggregate of minerals and/or mineraloids and does not have a specific chemical composition and mineraloids A mineraloid is a mineral-like substance that does not demonstrate crystallinity. Mineraloids possess chemical compositions that vary beyond the generally accepted ranges for specific minerals. For example, obsidian is an amorphous glass and not a crystal. Jet is derived from decaying wood under extreme pressure. Opal is another mineraloid because, with no specific chemical composition. Wood Wood is a hard, fibrous tissue found in many plants. It has been used for centuries for both fuel and as a construction material for several types of living areas such as houses. It is an organic material, a natural composite of cellulose fibers embedded in a matrix of lignin which resists compression. In the strict sense wood is produced as is a natural organic material consisting primarily of cellulose Cellulose is an organic compound with the formula n, a polysaccharide consisting of a linear chain of several hundred to over ten thousand β(1→4) linked D-glucose units fibers embedded in a matrix of organic lignin Lignin or lignen is a complex chemical compound most commonly derived from wood, and an integral part of the secondary cell walls of plants and some algae. The term was introduced in 1819 by de Candolle and is derived from the Latin word lignum, meaning wood. It is one of the most abundant organic polymers on Earth, exceeded only by cellulose,. In materials science, composites Composite materials, often shortened to composites, are engineered materials made from two or more constituent materials with significantly different physical or chemical properties which remain separate and distinct on a macroscopic level within the finished structure of more than one constituent material can be designed to have desired properties.

Classes of solids

Further information: Bonding in solids

The forces between the atoms in a solid can take a variety of forms. For example, a crystal of sodium chloride Sodium chloride, also known as salt, common salt, table salt, or halite, is an ionic compound with the formula Na (common salt) is made up of ionic An ion is an atom or molecule in which the total number of electrons is not equal to the total number of protons, giving it a net positive or negative electrical charge. An anion , from the Greek word ἀνω (anο), meaning "up", is an ion with more electrons than protons, giving it a net negative charge (since electrons are negatively sodium Sodium is a metallic element with a symbol Na (from Latin natrium or Arabic ناترون natrun; perhaps ultimately from Egyptian netjerj) and atomic number 11. It is a soft, silvery-white, highly reactive metal and is a member of the alkali metals within "group 1" (formerly known as ‘group IA’). It has only one stable isotope, 23Na and chlorine Chlorine (pronounced /ˈklɔəriːn/ KLOR-een, from the Greek word 'χλωρóς' , is the chemical element with atomic number 17 and symbol Cl. It is a halogen, found in the periodic table in group 17 (formerly VII, VIIa, or VIIb). As the chloride ion, which is part of common salt and other compounds, it is abundant in nature and necessary to, which are held together by ionic bonds An ionic bond is a type of chemical bond that involves a metal and a nonmetal ion through electrostatic attraction. In short, it is a bond formed by the attraction between two oppositely charged ions. In diamond or silicon, the atoms share electrons The electron is a subatomic particle carrying a negative electric charge. It has no known components or substructure, and therefore is believed to be an elementary particle. An electron has a mass that is approximately 1/1836 that of the proton. The intrinsic angular momentum of the electron is a half integer value in units of ħ, which means that and form covalent bonds A covalent bond is a form of chemical bonding that is characterized by the sharing of pairs of electrons between atoms, and other covalent bonds. In short, the attraction-to-repulsion stability that forms between atoms when they share electrons is known as covalent bonding. In metals, electrons are shared in metallic bonding Metallic bonding is the electromagnetic interaction between delocalized electrons, called conduction electrons and gathered in an "electron sea", and the metallic nuclei within metals. Understood as the sharing of "free" electrons among a lattice of positively-charged ions , metallic bonding is sometimes compared with that of. Some solids, particularly most organic compounds, are held together with van der Waals forces In physical chemistry, the van der Waals force , named after Dutch scientist Johannes Diderik van der Waals, is the attractive or repulsive force between molecules (or between parts of the same molecule) other than those due to covalent bonds or to the electrostatic interaction of ions with one another or with neutral molecules. The term includes: resulting from the polarization of the electronic charge cloud on each molecule. The dissimilarities between the types of solid result from the differences between their bonding.

Metals

Main article: Metal A metal is a chemical element that is a good conductor of both electricity and heat and forms cations and ionic bonds with non-metals. In chemistry, a metal is an element, compound, or alloy characterized by high electrical conductivity. In a metal, atoms readily lose electrons to form positive ions (cations). Those ions are surrounded by The pinnacle of New York's Chrysler Building The Chrysler Building is an Art Deco skyscraper in New York City, located on the east side of Manhattan in the Turtle Bay area at the intersection of 42nd Street and Lexington Avenue. Standing at 319 metres , it was the world's tallest building for 11 months before it was surpassed by the Empire State Building in 1931. After the destruction of the, the world's tallest steel-supported brick building, is clad with stainless steel.

Metals typically are strong, dense, and good conductors of both electricity Electrical conduction is the movement of electrically charged particles through a transmission medium . The movement of charge constitutes an electric current. The charge transport may be as a result of potential difference due to an electric field, or as a result of a concentration gradient in carrier density, that is, by diffusion. The physical and heat In heat transfer, conduction is the transfer of thermal energy between neighboring molecules in a substance due to a temperature gradient. It always takes place from a region of higher temperature to a region of lower temperature, and acts to equalize temperature differences. Conduction takes place in all forms of matter, viz. solids, liquids,. The bulk of the elements in the periodic table The periodic table of the chemical elements is a tabular display of the chemical elements. Although precursors to this table exist, its invention is generally credited to Russian chemist Dmitri Mendeleev in 1869, who intended the table to illustrate recurring ("periodic") trends in the properties of the elements. The layout of the table, those to the left of a diagonal line drawn from boron Boron is the chemical element with atomic number 5 and the chemical symbol B. Boron is a trivalent metalloid element which occurs abundantly in the evaporite ores borax and ulexite to polonium Polonium is a chemical element with the symbol Po and atomic number 84, discovered in 1898 by Marie Skłodowska-Curie and Pierre Curie. A rare and highly radioactive metalloid, polonium is chemically similar to bismuth and tellurium, and it occurs in uranium ores. Polonium has been studied for possible use in heating spacecraft. It is unstable;, are metals. Mixtures of two or more elements in which the major component is a metal are known as alloys An alloy is a partial or complete solid solution of one or more elements in a metallic matrix. Complete solid solution alloys give single solid phase microstructure, while partial solutions give two or more phases that may be homogeneous in distribution depending on thermal history. Alloys usually have different properties from those of the.

People have been using metals for a variety of purposes since prehistoric times. The strength and reliability of metals has led to their widespread use in construction of buildings and other structures, as well as in most vehicles, many appliances and tools, pipes, road signs and railroad tracks. Iron and aluminium are the two most commonly used structural metals, and they are also the most abundant metals in the Earth's crust. Iron is most commonly used in the form of an alloy, steel, which contains up to 2.1% carbon, making it much harder than pure iron.

Because metals are good conductors of electricity, they are valuable in electrical appliances and for carrying an electric current over long distances with little energy loss or dissipation. Thus, electrical power grids rely on metal cables to distribute electricity. Home electrical systems, for example, are wired with copper for its good conducting properties and easy machinability. The high thermal conductivity of most metals also makes them useful for stovetop cooking utensils.

The study of metallic elements and their alloys makes up a significant portion of the fields of solid-state chemistry, physics, materials science and engineering.

Metallic solids are held together by a high density of shared, delocalized electrons, known as "metallic bonding". In a metal, atoms readily lose their outermost ("valence") electrons, forming positive ions. The free electrons are spread over the entire solid, which is held together firmly by electrostatic interactions between the ions and the electron cloud.^[1] The large number of free electrons gives metals their high values of electrical and thermal conductivity. The free electrons also prevent transmission of visible light, making metals opaque, shiny and lustrous.

More advanced models of metal properties consider the effect of the positive ions cores on the delocalised electrons. As most metals have crystalline structure, those ions are usually arranged into a periodic lattice. Mathematically, the potential of the ion cores can be treated by various models, the simplest being the nearly free electron model.

Minerals

A collection of various minerals. Main article: Minerals

Minerals are naturally occurring solids formed through various geological processes under high pressures. To be classified as a true mineral, a substance must have a crystal structure with uniform physical properties throughout. Minerals range in composition from pure elements and simple salts to very complex silicates with thousands of known forms. In contrast, a rock sample is a random aggregate of minerals and/or mineraloids, and has no specific chemical composition. The vast majority of the rocks of the Earth's crust consist of quartz (crystalline SiO₂), feldspar, mica, chlorite, kaolin, calcite, epidote, olivine, augite, hornblende, magnetite, hematite, limonite and a few other minerals. Some minerals, like quartz, mica or feldspar are common, while others have been found in only a few locations worldwide. The largest group of minerals by far is the silicates (most rocks are ≥95% silicates), which are composed largely of silicon and oxygen, with the addition of ions of aluminium, magnesium, iron, calcium and other metals.

Ceramics

Si₃N₄ ceramic bearing parts Main article: Ceramic engineering

Ceramic solids are composed of inorganic compounds, usually oxides of chemical elements. They are chemically inert, and often are capable of withstanding chemical erosion that occurs in an acidic or caustic environment. Ceramics generally can withstand high temperatures ranging from 1000 to 1600 °C (1800 to 3000 °F). Exceptions include non-oxide inorganic materials, such as nitrides, borides and carbides.

Traditional ceramic raw materials include clay minerals such as kaolinite, more recent materials include aluminium oxide (alumina). The modern ceramic materials, which are classified as advanced ceramics, include silicon carbide and tungsten carbide. Both are valued for their abrasion resistance, and hence find use in such applications as the wear plates of crushing equipment in mining operations.

Most ceramic materials, such as alumina and its compounds, are formed from fine powders, yielding a fine grained polycrystalline microstructure which is filled with light scattering centers comparable to the wavelength of visible light. Thus, they are generally opaque materials, as opposed to transparent materials. Recent nanoscale (e.g. sol-gel) technology has, however, made possible the production of polycrystalline transparent ceramics such as transparent alumina and alumina compounds for such applications as high-power lasers. Advanced ceramics are also used in the medicine, electrical and electronics industries.

Ceramic engineering is the science and technology of creating solid-state ceramic materials, parts and devices. This is done either by the action of heat, or, at lower temperatures, using precipitation reactions from chemical solutions. The term includes the purification of raw materials, the study and production of the chemical compounds concerned, their formation into components, and the study of their structure, composition and properties.

Mechanically speaking, ceramic materials are brittle, hard, strong in compression and weak in shearing and tension. Brittle materials may exhibit significant tensile strength by supporting a static load. Toughness indicates how much energy a material can absorb before mechanical failure, while fracture toughness (denoted K_Ic ) describes the ability of a material with inherent microstructural flaws to resist fracture via crack growth and propagation. If a material has a large value of fracture toughness, the basic principles of fracture mechanics suggest that it will most likely undergo ductile fracture. Brittle fracture is very characteristic of most ceramic and glass-ceramic materials which typically exhibit low (and inconsistent) values of K_Ic.

For example of applications of ceramics, the extreme hardness of Zirconia is utilized in the manufacture of knife blades, as well as other industrial cutting tools. Ceramics such as alumina, boron carbide and silicon carbide have been used in bulletproof vests to repel large-caliber rifle fire. Silicon nitride parts are used in ceramic ball bearings, where their high hardness makes them wear resistant. In general, ceramics are also chemically resistant and can be used in wet environments where steel bearings would be susceptible to oxidation (or rust).

Radial rotor made from Si₃N₄ for a gas turbine engine

As another example of ceramic applications, in the early 1980s, Toyota researched production of an adiabatic ceramic engine with an operating temperature of over 6000 °F (3300 °C). Ceramic engines do not require a cooling system and hence allow a major weight reduction and therefore greater fuel efficiency. In a conventional metallic engine, much of the energy released from the fuel must be dissipated as waste heat in order to prevent a meltdown of the metallic parts. Work is also being done in developing ceramic parts for gas turbine engines. Turbine engines made with ceramics could operate more efficiently, giving aircraft greater range and payload for a set amount of fuel. However, such engines are not in production because the manufacturing of ceramic parts in the sufficient precision and durability is difficult and costly. Processing methods often result in a wide distribution of microscopic flaws which frequently play a detrimental role in the sintering process, resulting in the proliferation of cracks, and ultimate mechanical failure.

Glass ceramics

Main article: Glass-ceramic A high strength glass-ceramic cooktop with negligible thermal expansion.

Glass-ceramic materials share many properties with both non-crystalline glasses and crystalline ceramics. They are formed as a glass, and then partially crystallized by heat treatment, producing both amorphous and crystalline phases so that crystalline grains are embedded within a non-crystalline intergranular phase.

Glass-ceramics are used to make cookware (originally known by the brand name CorningWare) and stovetops which have both high resistance to thermal shock and extremely low permeability to liquids. The negative coefficient of thermal expansion of the crystalline ceramic phase can be balanced with the positive coefficient of the glassy phase. At a certain point (~70% crystalline) the glass-ceramic has a net coefficient of thermal expansion close to zero. This type of glass-ceramic exhibits excellent mechanical properties and can sustain repeated and quick temperature changes up to 1000 °C.

Glass ceramics may also occur naturally when lightning strikes the crystalline (e.g. quartz) grains found in most beach sand. In this case, the extreme and immediate heat of the lightning (~2500 °C) creates hollow, branching rootlike structures called fulgurite via fusion.

Organic solids

Main article: Organic chemistry The individual wood pulp fibers in this sample are around 10 µm in diameter.

Organic chemistry studies the structure, properties, composition, reactions, and preparation by synthesis (or other means) of chemical compounds of carbon and hydrogen, which may contain any number of other elements such as nitrogen, oxygen and the halogens: fluorine, chlorine, bromine and iodine. Some organic compounds may also contain the elements phosphorus or sulfur. Examples of organic solids include wood, paraffin wax, naphthalene and a wide variety of polymers and plastics.

Wood

Main article: Wood

Wood is a natural organic material consisting primarily of cellulose fibers embedded in a matrix of lignin. Regarding mechanical properties, the fibers are strong in tension, and the lignin matrix resists compression. Thus wood has been an important construction material since humans began building shelters and using boats. Wood to be used for construction work is commonly known as lumber or timber. In construction, wood is not only a structural material, but is also used to form the mould for concrete.

Wood-based materials are also extensively used for packaging (e.g. cardboard) and paper which are both created from the refined pulp. The chemical pulping processes use a combination of high temperature and alkaline (kraft) or acidic (sulfite) chemicals to break the chemical bonds of the lignin before burning it out.

Polymers

STM image of self-assembled supramolecular chains of the organic semiconductor quinacridone on graphite. Main article: Polymer

One important property of carbon in organic chemistry is that it can form certain compounds, the individual molecules of which are capable of attaching themselves to one another, thereby forming a chain or a network. The process is called polymerization and the chains or networks polymers, while the source compound is a monomer. Two main groups of polymers exist: those artificially manufactured are referred to as industrial polymers or synthetic polymers (plastics) and those naturally occurring as biopolymers.

Monomers can have various chemical substituents, or functional groups, which can affect the chemical properties of organic compounds, such as solubility and chemical reactivity, as well as the physical properties, such as hardness, density, mechanical or tensile strength, abrasion resistance, heat resistance, transparency, color, etc.. In proteins, these differences give the polymer the ability to adopt a biologically active conformation in preference to others (see self-assembly).

Household items made of various kinds of plastic.

People have been using natural organic polymers for centuries in the form of waxes and shellac which is classified as a thermoplastic polymer. A plant polymer named cellulose provided the tensile strength for natural fibers and ropes, and by the early 19th century natural rubber was in widespread use. Polymers are the raw materials (the resins) used to make what we commonly call plastics. Plastics are the final product, created after one or more polymers or additives have been added to a resin during processing, which is then shaped into a final form. Polymers which have been around, and which are in current widespread use, include carbon-based polyethylene, polypropylene, polyvinyl chloride, polystyrene, nylons, polyesters, acrylics, polyurethane, and polycarbonates, and silicon-based silicones. Plastics are generally classified as "commodity", "specialty" and "engineering" plastics.

Composite materials

Simulation of the outside of the Space Shuttle as it heats up to over 1500 °C during re-entry A cloth of woven carbon fiber filaments, a common element in composite materials Main article: Composites

Composite materials contain two or more macroscopic phases, one of which is often ceramic. For example, a continuous matrix, and a dispersed phase of ceramic particles or fibers.

Applications of composite materials range from structural elements such as steel-reinforced concrete, to the thermally insulative tiles which play a key and integral role in NASA's Space Shuttle thermal protection system which is used to protect the surface of the shuttle from the heat of re-entry into the Earth's atmosphere. One example is Reinforced Carbon-Carbon (RCC), the light gray material which withstands reentry temperatures up to 1510 °C (2750 °F) and protects the nose cap and leading edges of Space Shuttle's wings. RCC is a laminated composite material made from graphite rayon cloth and impregnated with a phenolic resin. After curing at high temperature in an autoclave, the laminate is pyrolized to convert the resin to carbon, impregnated with furfural alcohol in a vacuum chamber, and cured/pyrolized to convert the furfural alcohol to carbon. In order to provide oxidation resistance for reuse capability, the outer layers of the RCC are converted to silicon carbide.

Domestic examples of composites can be seen in the "plastic" casings of television sets, cell-phones and so on. These plastic casings are usually a composite made up of a thermoplastic matrix such as acrylonitrile butadiene styrene (ABS) in which calcium carbonate chalk, talc, glass fibers or carbon fibers have been added for strength, bulk, or electro-static dispersion. These additions may be referred to as reinforcing fibers, or dispersants, depending on their purpose.

Thus, the matrix material surrounds and supports the reinforcement materials by maintaining their relative positions. The reinforcements impart their special mechanical and physical properties to enhance the matrix properties. A synergism produces material properties unavailable from the individual constituent materials, while the wide variety of matrix and strengthening materials provides the designer with the choice of an optimum combination.

Semiconductors

Semiconductor chip on crystalline silicon substrate. Main article: Semiconductors

Semiconductors are materials that have an electrical resistivity (and conductivity) between that of metallic conductors and non-metallic insulators. They can be found in the periodic table moving diagonally downward right from boron. They separate the electrical conductors (or metals, to the left) from the insulators (to the right).

Devices made from semiconductor materials are the foundation of modern electronics, including radio, computers, telephones, etc. Semiconductor devices include the transistor, solar cells, diodes and integrated circuits. Solar photovoltaic panels are large semiconductor devices that directly convert light into electrical energy.

In a metallic conductor, current is carried by the flow of electrons", but in semiconductors, current can be carried either by electrons or by the positively charged "holes" in the electronic band structure of the material. Common semiconductor materials include silicon, germanium and gallium arsenide.

Nanomaterials

Main article: Nanotechnology Bulk silicon (left) and silicon nanopowder (right)

Many traditional solids exhibit different properties when they shrink to nanometer sizes. For example, nanoparticles of usually yellow gold and gray silicon are red in color; gold nanoparticles melt at much lower temperatures (~300 °C for 2.5 nm size) than the gold slabs (1064 °C);^[2] and metallic nanowires are much stronger than the corresponding bulk metals.^[3][4] The high surface area of nanoparticles makes them extremely attractive for certain applications in the field of energy. For example, platinum metals may be provide improvements as automotive fuel catalysts, as well as proton exchange membrane (PEM) fuel cells. Also, ceramic oxides (or cermets) of lanthanum, cerium, manganese and nickel are now being developed as solid oxide fuel cells (SOFC). Lithium, lithium titanate and tantalum nanoparticles are being applied in lithium ion batteries. Silicon nanoparticles have been shown to dramatically expand the storage capacity of lithium ion batteries during the expansion/contraction cycle. Silicon nanowires cycle without significant degradation and present the potential for use in batteries with greatly expanded storage times. Silicon nanoparticles are also being used in new forms of solar energy cells. Thin film deposition of silicon quantum dots on the polycrystalline silicon substrate of a photovoltaic (solar) cell increases voltage output as much as 60% by fluorescing the incoming light prior to capture. Here again, surface area of the nanoparticles (and thin films) plays a critical role in maximizing the amount of absorbed radiation.

Biomaterials

Main article: Biomaterials Collagen fibers of woven bone The iridescent nacre inside a Nautilus shell.

Many natural (or biological) materials are complex composites with remarkable mechanical properties. These complex structures, which have risen from hundreds of million years of evolution, are inspiring materials scientists in the design of novel materials. Their defining characteristics include structural hierarchy, multifunctionality and self-healing capability. Self-organization is also a fundamental feature of many biological materials and the manner by which the structures are assembled from the molecular level up. Thus, self-assembly is emerging as a new strategy in the chemical synthesis of high performance biomaterials.

Molecular self-assembly is found widely in biological organisms and provides the basis for a wide variety of biological structures. For example, the crystallization of inorganic materials in nature generally occurs at ambient temperature and pressure. Yet the vital organisms through which these inorganic materials form are able to create extremely precise and complex structures. Understanding the process in which living organisms control the growth of inorganic materials could lead to significant advances in materials science, opening the door to novel synthesis techniques for nanoscale composite materials.

The basic building blocks often begin with the 20 amino acids, and proceed to polypeptides, polysaccharides, and polypeptides–saccharides. These compose the basic proteins, which are the primary constituents of "soft tissues" and are also present in most biominerals. There are over 1000 proteins, including collagen, chitin, keratin, and elastin. The "hard" phases of biomaterials are primarily strengthened by minerals, which nucleate and grow in a biomediated environment that determines the size, shape and distribution of individual crystals. Important mineral phases are hydroxyapatite, silica, and aragonite; for example, hydroxyapatite is a major constituent of the bones.

One system which has been under intense scientific scrutiny by several major research groups is the microstructure of the mother-of-pearl (or nacre) portion of the abalone shell. This natural material exhibits the highest mechanical strength and fracture toughness of any non-metallic substance known. Electron microscopy has revealed neatly stacked (or ordered) mineral tiles separated by thin organic sheets along with a macrostructure of larger periodic growth bands which collectively form what scientists are currently referring to as a hierarchical composite structure. (The term hierarchy simply implies that there is a range of structural features which exist over a wide range of length scales). Early work showed that the overall nacre composite consists of only 5 wt.% organic material. Yet the work necessary to fracture the body was increased by up to 3000 times over inorganic CaCO₃ crystals as a result of the intricate hierarchy of structural organization.^[5][6]

Physical properties

Physical properties of elements and compounds which provide conclusive evidence of chemical composition include odor, color, volume, density (mass per unit volume), melting point, boiling point, heat capacity, physical form and shape at room temperature (solid, liquid or gas; cubic, trigonal crystals, etc), hardness, porosity, index of refraction and many others. This section discusses some physical properties of materials in the solid state.

Mechanical

Granite rock formation in the Chilean Patagonia. Like most inorganic minerals formed by oxidation in the Earth's atmosphere, granite consists primarily of crystalline silica SiO₂ and alumina Al₂O₃.

The mechanical properties of materials describe characteristics such as their strength and resistance to deformation. For example, steel beams are used in construction because of their high strength, meaning that they neither break nor bend significantly under the applied load.

Mechanical properties include elasticity and plasticity, tensile strength, compressive strength, shear strength, fracture toughness, ductility (low in brittle materials), and indentation hardness. Solid mechanics is the study of the behavior of solid matter under external actions such as external forces and temperature changes.

A solid does not exhibit macroscopic flow, as fluids do. Any degree of departure from its original shape is called deformation. The proportion of deformation to original size is called strain. If the applied stress is sufficiently low, almost all solid materials behave in such a way that the strain is directly proportional to the stress (Hooke's law). The coefficient of the proportion is called the modulus of elasticity or Young's modulus. This region of deformation is known as the linearly elastic region. Three models can describe how a solid responds to an applied stress:

• Elasticity – When an applied stress is removed, the material returns to its undeformed state.
• Viscoelasticity – These are materials that behave elastically, but also have damping. When the applied stress is removed, work has to be done against the damping effects and is converted to heat within the material. This results in a hysteresis loop in the stress–strain curve. This implies that the mechanical response has a time-dependence.
• Plasticity – Materials that behave elastically generally do so when the applied stress is less than a yield value. When the stress is greater than the yield stress, the material behaves plastically and does not return to its previous state. That is, irreversible plastic deformation (or viscous flow) occurs after yield which is permanent.

Many materials become weaker at high temperatures. Materials which retain their strength at high temperatures, called refractory materials, are useful for many purposes. For example, glass-ceramics have become extremely useful for countertop cooking, as they exhibit excellent mechanical properties and can sustain repeated and quick temperature changes up to 1000 °C. In the aerospace industry, high performance materials used in the design of aircraft and/or spacecraft exteriors must have a high resistance to thermal shock. Thus, synthetic fibers spun out of organic polymers and polymer/ceramic/metal composite materials and fiber-reinforced polymers are now being designed with this purpose in mind.

Thermal

Normal modes of atomic vibration in a crystalline solid.

Because solids have thermal energy, their atoms vibrate about fixed mean positions within the ordered (or disordered) lattice. The spectrum of lattice vibrations in a crystalline or glassy network provides the foundation for the kinetic theory of solids. This motion occurs at the atomic level, and thus cannot be observed or detected without highly specialized equipment, such as that used in spectroscopy.

Thermal properties of solids include thermal conductivity, which is the property of a material that indicates its ability to conduct heat. Solids also have a specific heat capacity, which is the capacity of a material to store energy in the form of heat (or thermal lattice vibrations).

Electrical

Video of superconducting levitation of YBCO

Electrical properties include conductivity, resistance, impedance and capacitance. Electrical conductors such as metals and alloys are contrasted with electrical insulators such as glasses and ceramics. Semiconductors behave somewhere in between. Whereas conductivity in metals is caused by electrons, both electrons and holes contribute to current in semiconductors. Alternatively, ions support electric current in ionic conductors.

Many materials also exhibit superconductivity at low temperatures; they include metallic elements such as tin and aluminium, various metallic alloys, some heavily doped semiconductors, and certain ceramics. The electrical resistivity of most electrical (metallic) conductors generally decreases gradually as the temperature is lowered, but remains finite. In a superconductor however, the resistance drops abruptly to zero when the material is cooled below its critical temperature. An electric current flowing in a loop of superconducting wire can persist indefinitely with no power source.

A dielectric, or electrical insulator, is a substance that is highly resistant to the flow of electric current. A dielectric, such as plastic, tends to concentrate an applied electric field within itself which property is used in capacitors. A capacitor is an electrical device that can store energy in the electric field between a pair of closely spaced conductors (called 'plates'). When voltage is applied to the capacitor, electric charges of equal magnitude, but opposite polarity, build up on each plate. Capacitors are used in electrical circuits as energy-storage devices, as well as in electronic filters to differentiate between high-frequency and low-frequency signals.

Electro-mechanical

Piezoelectricity is the ability of crystals to generate a voltage in response to an applied mechanical stress. The piezoelectric effect is reversible in that piezoelectric crystals, when subjected to an externally applied voltage, can change shape by a small amount. Polymer materials like rubber, wool, hair, wood fiber, and silk often behave as electrets. For example, the polymer polyvinylidene fluoride (PVDF) exhibits a piezoelectric response several times larger than the traditional piezoelectric material quartz (crystalline SiO₂). The deformation (~0.1%) lends itself to useful technical applications such as high-voltage sources, loudspeakers, lasers, as well as chemical, biological, and acousto-optic sensors and/or transducers.

Optical

Materials can transmit (e.g. glass) or reflect (e.g. metals) visible light.

Many materials will transmit some wavelengths while blocking others. For example, window glass is transparent to visible light, but much less so to most of the frequencies of ultraviolet light that cause sunburn. This property is used for frequency-selective optical filters, which can alter the color of incident light.

For some purposes, both the optical and mechanical properties of a material can be of interest. For example, the sensors on an infrared homing ("heat-seeking") missile must be protected by a cover which is transparent to infrared radiation. The current material of choice for high-speed infrared-guided missile domes is single-crystal sapphire. The optical transmission of sapphire does not actually extend to cover the entire mid-infrared range (3–5 µm), but starts to drop off at wavelengths greater than approximately 4.5 µm at room temperature. While the strength of sapphire is better than that of other available mid-range infrared dome materials at room temperature, it weakens above 600 °C. A long standing trade-off exists between optical bandpass and mechanical durability; new materials such as transparent ceramics or optical nanocomposites may provide improved performance.

Guided lightwave transmission involves the field of fiber optics and the ability of certain glasses to transmit, simultaneously and with low loss of intensity, a range of frequencies (multi-mode optical waveguides) with little interference between them. Optical waveguides are used as components in integrated optical circuits or as the transmission medium in optical communication systems.

Opto-electronic

Main article: Solar cell

A solar cell or photovoltaic cell is a device that converts light energy into electrical energy. Fundamentally, the device needs to fulfill only two functions: photo-generation of charge carriers (electrons and holes) in a light-absorbing material, and separation of the charge carriers to a conductive contact that will transmit the electricity (simply put, carrying electrons off through a metal contact into an external circuit). This conversion is called the photoelectric effect, and the field of research related to solar cells is known as photovoltaics.

Solar cells have many applications. They have long been used in situations where electrical power from the grid is unavailable, such as in remote area power systems, Earth-orbiting satellites and space probes, handheld calculators, wrist watches, remote radiotelephones and water pumping applications. More recently, they are starting to be used in assemblies of solar modules (photovoltaic arrays) connected to the electricity grid through an inverter, that is not to act as a sole supply but as an additional electricity source.

All solar cells require a light absorbing material contained within the cell structure to absorb photons and generate electrons via the photovoltaic effect. The materials used in solar cells tend to have the property of preferentially absorbing the wavelengths of solar light that reach the earth surface. However, some solar cells are optimized for light absorption beyond Earth's atmosphere as well.

See also

• Colloidal crystal
• Crystal growth
• Glass transition
• Nanomaterials
• Phase transformations in solids
• Strength of glass

References

1. ^ Mortimer, Charles E. (1975). Chemistry: A Conceptual Approach (3rd ed.). New York:: D. Van Nostrad Company.
2. ^ Buffat, Ph.; Burrel, J.-P. (1976). "Size effect on the melting temperature of gold particles". Physical Review A 13 (6): 2287. doi:10.1103/PhysRevA.13.2287.
3. ^ Walter H. Kohl (1995). Handbook of materials and techniques for vacuum devices. Springer. pp. 164–167. ISBN 1563963876. http://books.google.com/?id=-Ll6qjWB-RUC&pg=PA164.
4. ^ Shpak, Anatoly P; Kotrechko, Sergiy O; Mazilova, Tatjana I; Mikhailovskij, Igor M (2009). "Inherent tensile strength of molybdenum nanocrystals" (free-download pdf). Science and Technology of Advanced Materials 10: 045004. doi:10.1088/1468-6996/10/4/045004.
5. ^ Lin, A.; Meyers, M.A. (2005). "Growth and structure in abalone shell". Materials Science and Engineering A 390: 27. doi:10.1016/j.msea.2004.06.072.
6. ^ Mayer, G. (2005). "Rigid biological systems as models for synthetic composites". Science 310 (5751): 1144. doi:10.1126/science.1116994. PMID 16293751.

States of matter Solid Liquid Gas Plasma Low- temperature Bose–Einstein condensate · Fermionic condensate · Superfluid · Supersolid High-energy Degenerate matter · Quark–gluon plasma · Strange matter · Supercritical fluid · Neutronium Other Colloid · Superconductivity · Supercooling · Superglass · Superheating · Liquid crystal Concepts Boiling point · Cooling curve · Critical point · Equation of state · Melting point · Phase transition · Triple point · String-net liquid Lists List of states of matter

Categories: Phases of matter | Solids

 

 

See Also:

 

What Links Here:

 

Recently Viewed Pages:

• Wilcoxon Signed-rank Test: Encyclopedia
• Home
• Military: Blogs
• Ranker: Images
• World Football Elo Ratings: Auctions
• Blog Search
• Web Search
• HITS Algorithm: Answers
• Young Frankenstein: Answers
• Directory Search

 

Most Popular Pages:

• HITS Algorithm: Answers
• Home
• Young Frankenstein: Answers
• Mann-Whitney U: Images
• Histogram: Images
• Solid: Web Search
• Frankfurt School: Blogs
• Wilcoxon Signed-rank Test: Encyclopedia
• Ranker: Images
• Ranking

Related 'Solid' Searches:

related terms:	Metals	Chemical Composition	Minerals	Glass Ceramic
	Solid State	Physical Properties	Glass Ceramics	Ceramic Materials
	Solid	Electrons	Physics	Mechanical Properties

---

top user searches:	►

---

or search for "Solid" in:		Web:		The Entire Web	Related Sites	Web Directories
		This Site:		Page Titles	Karr Network Sites*
		News:		Headlines	Weather	Events	Blogs
		Reference:		Encyclopedia	Dictionary	eTexts	Quotes
				Local Map	Answers
		Multimedia:		Images	Videos
		People:		Discussion Groups	Social Networking
		Shopping:		General Merch.	Consumer Opinion	Auctions	Classifieds

 

---

The Entire Web Web Directories Related* Sites Karr Network Sites* Page Titles Headlines Weather Events Blogs Encyclopedia Dictionary eTexts Quotes Answers Local Map Videos Images Social Networking Discussion Groups General Items Auctions Classifieds Consumer Opinion

Sitemap News Dictionary Encyclopedia Blogs Answers Videos Images Shopping Directory More…